NEC NP52G Benutzerhandbuch
30
. Convenent Features
➍
Changing Lamp Mode
VOLUME ASPECT
HELP
FOCUS
L-MOUSE-R
FREEZE
PICTURE
LAMP MODE
VIDEO
AUTO ADJ.
COMPUTER
S-VIDEO VIEWER
The lamp life can be extended by using the ECO mode.
To change to the “ECO” mode, do the following:
1. Press the laMP MOde button to display [laMP MOde] screen.
2. Use the seleCt
2. Use the seleCt
▲ or ▼ button to select [eCO] mode.
3. Press the enter button. Or press the seleCt
▶ button to se-
lect [OK] and press the enter button.
to cancel it, select [CanCel] and press the enter button.
To change from [ECO] to [NORMAL], Go back to Step 2 and select
[NORMAL]. Repeat Step 3.
[NORMAL]. Repeat Step 3.
Lamp Mode
Description
Status of LAMP indicator
Normal Mode
This is the default setting (100%
Brightness).
Brightness).
Off
Eco Mode
Select this mode to increase the
lamp life (NP62/NP61: approx. 75%
Brightness, NP52NP41: approx.
85% Brightness).
lamp life (NP62/NP61: approx. 75%
Brightness, NP52NP41: approx.
85% Brightness).
Steady Green light
• The [LAMP MODE] can be changed by using the menu.
Select [SETUP]
Select [SETUP]
→ [GENERAL] → [LAMP MODE]
(
→ page
➎
Preventing the Unauthorized Use of the Projector
A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a key-
word is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered,
the projector cannot project an image.
word is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered,
the projector cannot project an image.
To enable the Securty functon:
1. Press the MenU button.
The menu will be displayed.
2. Press the seleCt
The menu will be displayed.
2. Press the seleCt
▶ button twice to select [setUP] and press the seleCt ▼ button or the enter button
to select [general].
3. Press the seleCt
▶ button to select [installatiOn].
4. Press the seleCt
▼ button three times to select [seCUritY] and press the enter button.
The OFF/ON menu will be displayed.