NEC NP52G Benutzerhandbuch

❺

Connecting the optional Bluetooth® USB adaptor (NP01BA) to the USB port (Type A) of the projector will allow you
to  transmit  images  wirelessly  from  your  computers  or  mobile  phones  with  Bluetooth  wireless  technology  to  the
projector.

•  If you remove the Bluetooth® USB adaptor from the projector, all the images that the projector received

will be deleted.

•  When the projector  goes into  the standby  mode  or when the AC power supply is turned  off, all the re-

ceived images will be deleted.

•  Received images cannot be stored to the projector.
•  The maximum available space for received images in all is 6MB. One image must not exceed 2.5MB in

size.

•  If the projector is receiving images beyond the space limit during the transmission, the oldest image will

be deleted and will receive a new image. When the image is received, a confirmation message will not be
displayed.

Typcal Specficatons of Bluetooh® USB Adaptor

Model name

NP01BA

Standard

Bluetooth Ver.2.0+EDR

Transmission method

FH-SS (Frequency-Hopping Spread Spectrum)

Frequency range

2.4GHz band (2402-2480MHz)

Transmission output

2.5mW, Class2

Supported profiles

BIP (Basic Imaging Profile)
OPP (Object Push Profile)

Communication distance

Approx. 10m/33 feet (*The communication distance may vary depending on the environ-
ment.)

Dimensions

17.6 mm/0.69”(Width) x 9.0 mm/0.35”(Height) x 56.3 mm/2.22”(Depth)

Weight

6g/0.2 oz

Use environment

Temperature: 0°C to 40°C/ 32°F to 104°F
Humidity: 20 to 80% (non-condensing)

Storage environment

Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 20 to 80%(non-condensing)

•  Make sure beforehand that your transmission device supports the BIP or OPP profile according to the user’s

manual supplied with your transmission device.

•  Bluetooth® USB adaptor (NP01BA) is for the exclusive use of our projectors.