Panasonic PT-DS8500U Benutzerhandbuch
ENGLISH -
41
Basic Operation
Projecting
Check the connections of the peripheral devices, installation of the projection lens (
page 39) to start the projector. Select the input signal
and adjust the image.
Selecting the input signal
Attention
Images may not be projected properly depending on the
z
connected device and DVD, video tape, etc. to be played.
Select a system format that is suitable for the input signal
using the [SYSTEM SELECTOR] in the [PICTURE] menu
(
Select a system format that is suitable for the input signal
using the [SYSTEM SELECTOR] in the [PICTURE] menu
(
Check the aspect ratios of the screen and the image and
z
select the optimum aspect ratio using [ASPECT] in the
[PICTURE] menu (
[PICTURE] menu (
How to adjust the focus,
zoom and shift
zoom and shift
Use the Lens Shift, Zoom, and Focus controls to
properly frame the image on the screen.
properly frame the image on the screen.
J
At the projector
Press <LENS> button on the control
1 )
panel.
Pressing the button changes the setup screen
z
in the order of [FOCUS], [ZOOM] and [SHIFT].
Press ▲▼◄► to select an item and
2 )
adjust it.
J
Using the remote control
Press <LENS> (FOCUS, ZOOM, SHIFT)
1 )
button on the remote control.
Press <FOCUS> button :
z
Adjust focus.
Press <ZOOM> button :
Press <ZOOM> button :
z
Adjust zoom.
Press <SHIFT> button :
Press <SHIFT> button :
z
Adjust focus.
Press ▲▼◄► to select an item and
2 )
adjust it.
Note
Be careful not to catch your fingers between the lens and
z
shroud when shifting the lens.
The zoom adjustment menu will be displayed only when
The zoom adjustment menu will be displayed only when
z
a lens with zoom function is installed.
When using ET-D75LE5, set the shift to the home
When using ET-D75LE5, set the shift to the home
z
position.
The adjustment can be performed faster by pressing and
The adjustment can be performed faster by pressing and
z
holding the ▲▼◄► for about 7 seconds or more.
It is recommended that the images are projected
It is recommended that the images are projected
z
continuously for at least 30 minutes before the focus is
adjusted.
If the power is turned off during focus or shift adjustment,
adjusted.
If the power is turned off during focus or shift adjustment,
z
the LENS CALIBRATION must be performed when the
power is turned on next time.
If the main power is turned off during focus adjustment,
power is turned on next time.
If the main power is turned off during focus adjustment,
z
the LENS CALIBRATION will be performed automatically
when the focus is adjusted next time.
If the main power is turned off during shift adjustment,
when the focus is adjusted next time.
If the main power is turned off during shift adjustment,
z
“LENS CALIBRATION ERROR” is displayed when the
shift is adjusted next time. Please perform the [LENS
CALIBRATION] from the menu (
shift is adjusted next time. Please perform the [LENS
CALIBRATION] from the menu (
If “LENS CALIBRATION ERROR” is still displayed after
z
the LENS CALIBRATION is performed, ask your dealer
for repair.
for repair.