Airlink101 AR410W Benutzerhandbuch

 

41

DMZ Host IP: Type the IP address of the computer. The computer with the specified IP 
address will have unrestricted two-way access with the Internet. 
Apply: Click to save the settings. 
 

This screen enables you to set up the firewall. The router provides basic firewall 
functions by filtering all the packets that enter the router using a set of rules. The rules 
are in an ordered sequence—the higher a rule is in the list, the higher the priority the 
rule has. 
 

 
Enable: Click to enable or disable the firewall rule profile. 
Name: Type a descriptive name for the firewall rule profile. 
Action: Select whether to allow or deny packets that conform to the rule. 
Source: Defines the source of the incoming packet that the rule is applied to. 
● Interface: Select which interface (WAN or LAN) the rule is applied to. 
● IP Range Start: Type the beginning of the IP address range that the rule is applied to. 
● IP Range End: Type the end of the IP address range that the rule is applied to. 
Destination: Defines the destination of the incoming packet that the rule is applied to. 
● Interface: Select which interface (WAN or LAN) the rule is applied to. 
● IP Range Start: Type the beginning of the IP address range that the rule is applied to. 
● IP Range End: Type the end of the IP address range that the rule is applied to. 
● Protocol: Select the protocol (TCP, UDP, or ICMP) of the destination. 
● Port Range: Select the port range.