Apple 578 Benutzerhandbuch

 Take Apart

Chassis Harness Assembly - 37

1 Disconnect the speaker wire spade connector from the 

back of the speaker.

2 Remove the Phillips screws from the front of the 

speaker.

  Detach the replacement speaker from its 

wires and connect the replacement speaker to the original 

speaker wires.

  The speaker wire connectors are very fragile.

1 Look down on the chassis cable bridge and locate the 

notches in the cable bridge on top of the wire connectors.

2 Using a jeweler's screwdriver, very gently press down 

on the tab in the middle of the wire connector. You will 

feel or hear a snap.