Toshiba ProT1!0 Benutzerhandbuch

Chapter 2 Troubleshooting Procedures

Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)

2.5 SATA Hard Disk Drive Troubleshooting

To check if HDD is malfunctioning or not, follow the troubleshooting procedures below as
instructed.

e 1: Partition Check

2: Message Check
3: Format Check

Diagnostic Test Program Execution Check

ector Check and Replacement Check

of the hard disk will be erased when the HDD troubleshooting

Procedur
Procedure

Procedur
Procedure 4:
Procedure 5: Conn

CAUTION: The contents

procedures are executed. Transfer the contents of the hard disk to other
storage drive(s). For the backup, refer to the User’s Manual.

Procedure 1

Partition Check

e computer. Perform the following checks:

heck 2 input USB memories and press Enter. Choose Display Partition Information from

the menu. If drive C is listed in the Display Partition Information, go to Check 3.
If drive C is not listed, return to the menu and choose the option to create a DOS
partition or a logical DOS drive on drive C. If the problem still occurs, go to
Procedure 2.

heck 3 If drive C is listed as active in the menu, go to Check 4. If drive C is not listed as

active, return to the menu and choose the option to set the active partition for
drive C. Then go to Procedure 2.

heck 4 Remove the USB memory and reboot the computer. If the problem still occurs, go

to Procedure 2. Otherwise, the 2.5” HDD is operating normally.

Insert the Toshiba USB memory and start th

Check 1 Input C: and press Enter. If you cannot change to drive C, go to Check 2. If y

can change to drive C, go to Procedure 2.