Toshiba PRO T210 Benutzerhandbuch

  

                                                                                                            

Satellite T210/T215 Series Maintenance Manual 

                                                                          

22

 

To determine if the computer’s built-in TouchPad is functioning properly, perform the 
following procedures. Figure 2-6 outlines the process. Start with Procedure 1 and continue as 
instructed. 

Procedure 1:    Perform Touchpad test 

Procedure 2:  Touchpad connection check 

Procedure 3:  Touchpad replacement check 

Run the Diagnostic Program, which will automatically execute the Touchpad test. (Refer to 
Chapter 3 system configuration check), Tests and Diagnostics for more information on the 
program. 

If an error is located, go to Procedure 2.  If an error is not located, the Touchpad function is 
functioning properly. 

The Touchpad is connected via the Touchpad FPC to the system board. Make sure the 
Touchpad FPC cable is firmly connected to the Touchpad and system board. Refer to Chapter 
4, Replacement Procedures, for instructions on how to disassemble the computer and then 
perform the following checks. 

If any of the connections are loose, reconnect firmly.  If any of the connections is damaged, or 
there is still an error, go to Procedure 3. 

The Touchpad unit or FPC may be defective or damaged.  Replace each with a new one 
following the steps in Chapter 4.  If the free-Dos test is still not functioning properly, replace 
the system board with a new one following the steps in Chapter 4.