Zebra Technologies 105SL Plus Benutzerhandbuch
137
Troubleshooting
Printing Issues
7/3/13
P1056468-002
Long tracks of
missing print on
several labels
missing print on
several labels
Print element damaged.
Call a service technician.
Wrinkled ribbon.
See wrinkled ribbon causes and solutions in
Fine, angular gray
lines on blank labels
lines on blank labels
Wrinkled ribbon.
See wrinkled ribbon causes and solutions in
Printing too light or
too dark over the
entire label
too dark over the
entire label
The media or ribbon is not
designed for high-speed
operation.
designed for high-speed
operation.
Replace supplies with those recommended for
high-speed operation.
high-speed operation.
You are using an incorrect
combination of media and
ribbon for your application.
combination of media and
ribbon for your application.
1.
Switch to a different type of media or ribbon
to try to find a compatible combination.
to try to find a compatible combination.
2.
If necessary, consult your authorized Zebra
reseller or distributor for information and
advice.
reseller or distributor for information and
advice.
You are using ribbon with
direct thermal media.
direct thermal media.
Direct thermal media does not require ribbon. To
determine if you are using direct thermal media,
perform the label scratch test in
determine if you are using direct thermal media,
perform the label scratch test in
.
Incorrect or uneven printhead
pressure.
pressure.
1.
Position the printhead toggles correctly. See
.
2.
Set the printhead pressure to the minimum
needed for good print quality. See
needed for good print quality. See
Smudge marks on
labels
labels
The media or ribbon is not
designed for high-speed
operation.
designed for high-speed
operation.
Replace supplies with those recommended for
high-speed operation.
high-speed operation.
Misregistration/skips
labels
labels
The printer is not calibrated.
Calibrate the printer. See
.
Improper label format.
Check your label format and correct it as
necessary.
necessary.
Misregistration and
misprint of one to
three labels
misprint of one to
three labels
The platen roller, pinch roller,
or peel roller is dirty.
or peel roller is dirty.
Media does not meet
specifications.
specifications.
.
Vertical drift in
top-of-form position
top-of-form position
The printer is out of calibration.
.
The platen roller, pinch roller,
or peel roller is dirty.
or peel roller is dirty.
Table 14 • Printing Issues (Continued)
Issue
Possible Cause
Recommended Solution