Zebra Technologies 105SL Plus Benutzerhandbuch

Select a Data Communication Interface

7/3/13

P1056468-002 

RS-232 Serial

Standard

Maximum cable length of 50 ft (15.24 m).

You may need to change printer parameters to match the host 
computer.

You need to use a null-modem adaptor to connect to the printer 
if using a standard modem cable.

Connections and Configuration  The baud rate, number of 
data and stop bits, the parity, and the XON/XOFF or DTR control 
must match those of the host computer.

USB

Standard

Maximum cable length of 16.4 ft (5 m).

No printer parameter changes required to match the host 
computer.

Connections and Configuration  No additional 
configuration is necessary.

8-bit Parallel data 
interface

Standard

Maximum cable length of 10 ft (3 m).

Recommended cable length of 6 ft (1.83 m).

No printer parameter changes required to match the host 
computer.

A wired or wireless print server (if installed) takes up this port 
on the printer.

Connections and Configuration  No additional 
configuration is necessary. 

Wired Ethernet print 
server

Option

Can print to the printer from any computer on your LAN.

Can communicate with the printer through the printer’s web 
pages.

The printer must be configured to use your LAN.

A parallel connection or a wireless print server (if installed) 
takes up this port on the printer.

Be careful not to plug a USB cable into a wired 

Ethernet print server connector on the printer because doing so 
will damage the Ethernet connector.

Connections and Configuration  Refer to the ZebraNet 
Wired and Wireless Print Servers User Guide for configuration 
instructions. A copy of this manual is available at 

 or on the user CD that came with 

your printer.

To use this connection, you may need to remove a 

factory-installed plug that is designed to keep someone 
from accidentally plugging a USB connector into this port.