Zebra Technologies 105SLTM Benutzerhandbuch

Print Quality Problems

6/30/06

105SL User Guide

11342L-001 Rev. A

Wrinkled ribbon.

See wrinkled ribbon causes and solutions in this 
table.

Media or ribbon is not designed 
for high-speed operation.

Replace supplies with those recommended for 
high-speed operation.

You are using an incorrect 
combination of labels and 
ribbon for your application.

1.

Switch to a different type of media or ribbon 
to try to find a compatible combination.

2.

If necessary, consult your authorized Zebra 
reseller or distributor for information and 
advice.

You are using ribbon with 
direct thermal media.

Direct thermal media does not require ribbon. To 
check if you are using direct thermal media, 
perform the label scratch test in 

.

If you are using ribbon intentionally with direct 
thermal media, increase the darkness level, but 
note that high darkness levels may decrease 
printhead life. You may wish to perform the 

 to determine the 

ideal darkness setting.

Incorrect or uneven printhead 
pressure.

Set the pressure to the minimum needed. See 

.

Media or ribbon is not designed 
for high-speed operation.

Replace supplies with those recommended for 
high-speed operation.

The printer is not calibrated.

Recalibrate the printer.

Media sensor is not positioned 
correctly.

Perform media sensor position adjustment.

Improper label format.

Use correct label format.

The platen roller is dirty.

See 

Media sensor is not positioned 
correctly.

Place media sensor in proper position.

Media does not meet 
specifications.

Use media that meets specifications.