OKI 6w Benutzerhandbuch
12 Quick Setup
We recommend that you use a
✔ Bi-directional parallel
printer cable. Purchase a cable
marked “IEEE 1284 compliant.”
marked “IEEE 1284 compliant.”
✔ To comply with FCC regula-
tions, the cable must be shielded
and UL and CSA approved.
and UL and CSA approved.
5
Connect to Your Computer
■
Insert the other end into the
parallel port on your computer
and tighten the screws.
parallel port on your computer
and tighten the screws.
■
Install the power cord into the
printer receptacle, then into an
outlet.
printer receptacle, then into an
outlet.
■
Turn power ON.
Note: OKIDATA has tested and
approved the following bi-
directional cable: Part Number
70000803. See page 21 for
purchasing information.
approved the following bi-
directional cable: Part Number
70000803. See page 21 for
purchasing information.
■
Make sure both your printer
and computer are OFF.
and computer are OFF.
■
Insert the wide connector into
the parallel port on your
printer, then snap both wire
clips into the notches on the
cable connector.
the parallel port on your
printer, then snap both wire
clips into the notches on the
cable connector.