Seiko Group TM-L60 Benutzerhandbuch

n The purpose of the self test

The self test checks whether the printer has any problems.
When the printer does not function properly, please contact the dealer.

n The self test checks the following

l 

Control circuit functions

l 

Control ROM version

l 

Printer mechanism

l 

DIP-switch settings

l 

Print quality

n Running the self test

Run the self test only when thermal roll paper or label paper is loaded the printer.

     Make sure the roll-paper cover is closed and the roll paper is installed correctly.

   Turn on the power while holding down the FEED switch. The self test begins.

   The following contents are printed for printer current status printing first.

l 

Control ROM version

l 

DIP-switch settings

l 

Interface settings

l 

Print density

  After printing the printer

current status, the printer

blinks the ERROR LED and
enters the test printing

standby state.

Press the FEED switch to
restart test printing.

     After the printer completes

a certain number of lines, it

prints” *** completed **
* ", and stops printing au-

tomatically.

*  The printer goes off-tine

during and after self-test

printing. Turn the power off

and on again to put the

printer on-line before

transmitting data from the

host computer.

14