Ricoh AP610N Benutzerhandbuch
Cleaning the Printer
46
3
E
Slide the green lock lever to the
left ( ), so that the paper feed
roller can be released ( ).
left ( ), so that the paper feed
roller can be released ( ).
F
Wipe the rubber part of the roller
with a soft damp cloth. Then,
wipe it with a dry cloth to remove
the water.
with a soft damp cloth. Then,
wipe it with a dry cloth to remove
the water.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
or benzene.
G
While sliding the green lock lever
to the left ( ), set the paper feed
roller to its original position ( ).
Then, return the green lock lever
to its original position ( ).
to the left ( ), set the paper feed
roller to its original position ( ).
Then, return the green lock lever
to its original position ( ).
Note
❒ Check the green lock lever se-
cures the roller correctly by
making sure the new roller ro-
tates smoothly.
making sure the new roller ro-
tates smoothly.
H
Move the printer to the place where
it was placed. Carefully slide the
paper tray into the printer until it
stops.
it was placed. Carefully slide the
paper tray into the printer until it
stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
and side guides might move.
Note
❒ Follow the same procedure to
clean the paper feed roller of the
optional paper feed Unit.
optional paper feed Unit.
ZKGM120E
ZKGM130E
ZKGY150E
KirP4GB_Mainte-F6_FM_forPaper.book Page 46 Thursday, May 12, 2005 11:48 AM