Ricoh AP610N Benutzerhandbuch
Appendix
80
7
Moving the Printer
R CAUTION:
Moving the printer in the short distance
A
Be sure to check the following points:
• The power of the printer is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
• The power of the printer is turned off.
• The power cable is unplugged from the wall outlet.
• The interface cable is unplugged from the printer.
B
If the external options are installed, remove them.
See Setup Guide and follow the steps backwards for removing options.
See Setup Guide and follow the steps backwards for removing options.
C
Be sure to close the Bypass Tray and the front cover.
D
Lift the printer and move it to the place where you want to install it.
Important
❒ When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
❒ Be sure to move the printer horizontally. Moving the printer facing up on
down may cause the toner to scatter.
❒ If the optional paper feed unit(s) is installed, detach and move the printer
separately. Never move the printer with the paper feed unit(s) attached.
E
If you removed options, reinstall them.
See Setup Guide for installing options.
See Setup Guide for installing options.
• The machine weight is approximately 20 kg (44.1 lb.).
• When lifting the machine, use the inset grips on both sides. Otherwise the
printer could break or cause injury if dropped.
• Before moving the machine, unplug the power cord from the outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.
cords can cause an electrical or fire hazard.
AGN038S
KirP4GB_Mainte-F6_FM_forPaper.book Page 80 Thursday, May 12, 2005 11:48 AM