Epson PP-100 Benutzerhandbuch
Product Information
93
c
Caution:
❏ Make sure to set the inner diameter and the outer diameter within the areas shown above.
❏ Make sure to set the inner diameter and the outer diameter within the areas shown above.
Printing on sections outside the printable area may damage your CD/DVD drive.
❏ The EPSON Total Disc Maker can set between inner diameter of 18 mm to outer diameter
of 119.4 mm (0.71 to 4.70"). However, printing outside printable area (45 to 116 mm) may
result in sticking. It is recommended to check the disc type before using.
When printing outside printable area (ink absorbing layer) of the disc is being used, ink
printed outside the printable area does not fix. Check the label of the printable area of the
disc being used before setting.
result in sticking. It is recommended to check the disc type before using.
When printing outside printable area (ink absorbing layer) of the disc is being used, ink
printed outside the printable area does not fix. Check the label of the printable area of the
disc being used before setting.
❏ Precautions for setting the printable area
-Make sure that the printable area set does not exceed the printable area of the actual
disc being used.
-Check whether coloration of print made on the rib (stack ring) is not uniform.
-Printing on the rib (stack ring) may cause ink sticking, disc sticking, and ink erasure after
printing.
disc being used.
-Check whether coloration of print made on the rib (stack ring) is not uniform.
-Printing on the rib (stack ring) may cause ink sticking, disc sticking, and ink erasure after
printing.
❏ Measures to be taken when printing outside printable area
When printing inside the inner diameter results in ink sticking, disc sticking, and ink
erasure, the following action can be taken to avoid that.
-Set Drying Time on the printer driver’s printer settings screen and print. Although
throughput may be reduced, problems will be avoided or reduced since the disc will be
ejected after a set time.
-Enable Publish after Mask Rib Area. If you print from another application, set from the
user-defined label setting in the printer driver. If you print from the Total Disc Maker, set
from Set Inner/Outer Diameter setting.
erasure, the following action can be taken to avoid that.
-Set Drying Time on the printer driver’s printer settings screen and print. Although
throughput may be reduced, problems will be avoided or reduced since the disc will be
ejected after a set time.
-Enable Publish after Mask Rib Area. If you print from another application, set from the
user-defined label setting in the printer driver. If you print from the Total Disc Maker, set
from Set Inner/Outer Diameter setting.
Note:
When you print on CDs/DVDs with a commercially available software package that supports
CD/DVD printing, you have to make the following settings.
When you print on CDs/DVDs with a commercially available software package that supports
CD/DVD printing, you have to make the following settings.
Ink cartridges
Size
124 x 124 mm (4.88 x 4.88")
Type
CD/DVD Label, CD/DVD Premium Label, or EPSON
Specified CD/DVD Label
Specified CD/DVD Label
Margins on all sides
2 mm (0.08")
Color
Black, Yellow, Magenta, Light Magenta, Cyan, Light Cyan
Cartridge life
Use within 6 months of opening the package.
Temperature
Storage:
-20 to 40 °C (-4 to 104 °F)
-20 to 40 °C (-4 to 104 °F)
1 month at 40 °C (104 °F)