Xerox 019-6400 Benutzerhandbuch
P
RINTING
33
P
RINTING
This chapter describes printing to the Integrated Fiery Color Server. You can print from a
networked Windows computer or a computer using Windows (WINS) printing. You can also
print to a file so that it can be printed at a remote location (see
networked Windows computer or a computer using Windows (WINS) printing. You can also
print to a file so that it can be printed at a remote location (see
on page 53). In addition to these methods, you can download certain types
of files to the Integrated Fiery Color Server using the Docs tab in WebTools (see
) and
Command WorkStation (see
), and print documents using Hot Folders (see
and E-mail Services (see
For information about setting up the Windows environment for printing with Windows
servers connected to the Integrated Fiery Color Server, see
servers connected to the Integrated Fiery Color Server, see
. For
information about connecting to the Integrated Fiery Color Server over the network, see
. For information about installing printer drivers, see
N
OTE
:
The following procedures use Windows XP illustrations unless specified.
Printing from applications
After you install the Integrated Fiery Color Server printer driver and configure the proper
port, you can print directly from most Windows applications. Set the print options for the
job and choose Print from your application.
port, you can print directly from most Windows applications. Set the print options for the
job and choose Print from your application.
To achieve optimal printing results from specific applications, see
and
.
Setting options and printing
To print from Windows platforms, install the PostScript printer driver or PCL printer driver.
For instructions, see
For instructions, see
. Be sure to configure the options in the
Advanced tab of the printer driver after installation is complete, as described on
.
If you print to a virtual printer, you may not be able to set some print options, depending on
how the virtual printer is configured.
how the virtual printer is configured.
The following procedures explain how to use the printer driver to specify print options for a
particular job and print it to the Integrated Fiery Color Server. You can also set default print
settings using the driver. For information about specific print options, see
particular job and print it to the Integrated Fiery Color Server. You can also set default print
settings using the driver. For information about specific print options, see
.
N
OTE
:
The following procedures use Windows XP illustrations.The interface may vary
slightly depending on whether you are using the PostScript or PCL driver. Major differences
are noted.
are noted.