Primera Technology Automated Optical Disc Printing System Benutzerhandbuch

Printing Discs on a PC

D. USING KIOSK MODE

Kiosk Mode

allows you to use both of Printer's Bins as input,

doubling your disc capacity from 50 discs to 100 discs. In this

mode, the finished discs will be deposited out through the

front "reject area" of the Printer. In Kiosk mode all discs would

be ejected in this manner. Rejects can be identified in the

stack because they will not be printed in the same manner as

successfully recorded discs. Refer to the Kiosk Kit installation

instructions below.

•

Attach the Output Bin

Holder as shown,

aligning the Locating

Tabs on the Output

Bin Holder with the

Slots located on the

underside of the

Printer allowing the

holder to hang off the

edge of the table.

Notice the slots do

allow for adjusting

the position of the

output bin. If your

discs are not falling

into the bin, you will

be able to move the

bin slightly to align it.

•

Place the Output Bin

on the Output Bin

Holder as shown.

Slots

Locating Tabs

510921PM.qxd 1/25/2007 8:52 AM Page 22

TOC

INDEX