Epson 1280 Benutzerhandbuch

Sawgrass Technologies, Inc.                    SubliJet IQ

®

 Getting Started Guide for the EPSON Stylus Photo 1280 

                                                                                                                                                                            
                                                                                                                                                                                13 

 

 

1.  Attach slide clamps to tubing, one clamp for each tube. 
 
2.  Move the slide clamp close to the female connector on the tubing of the ink bag to 

be changed. 

 
3.  Slide the clamp so that it pinches the tubing closed. 
 
4.  Disconnect the connectors by pressing the silver button on the female connector.  

Be aware the connectors may drip slightly when removed. Replace the empty ink 
bag with a fresh one. 

 

5.  Loosen the clamp so that it hangs loosely on the tubing.  

 

1.  To transport the printer with the QuickConnect, ensure the printer is off and in the 

parked position (printhead is all the way to the right and will not move). 

  
2.  Starting with the black tube, move  the slide clamp close to the female connector 

and slide the clamp so that it pinches the tubing closed. Repeat this for all tubes.  

 

3.  Once the tubing is pinched off it is safe to transport the QuickConnect. Just 

remember to loosen the clamps when you’ve arrived at your destination to allow 
for the flow of ink again.