Canon IP2000 Benutzerhandbuch

Basic Printing

This section describes how to load paper in the Auto Sheet Feeder and the Front Sheet 
Feeder.

„ Print Media to Avoid

Do not use the following types of paper. Using such paper will not only produce 
unsatisfactory results, but can also cause the printer to jam or malfunction.

• Folded, curled or wrinkled paper

• Damp paper

• Paper that is too thin (less than 64 gsm or 17 lb)

• Paper that is too thick* (more than 105 gsm or 28 lb)

*non-Canon branded paper

• Picture postcards

• Postcards with an affixed photo or sticker

• Envelopes with a double flap

• Envelopes with pressure seals

• Envelopes with an embossed or treated surface

• Paper with holes (such as Loose-leaf paper)

„ Using the Auto Sheet Feeder and the Front Sheet Feeder

You can load paper in the Auto Sheet Feeder and the Front Sheet Feeder.

When printing small quantities on various print media, loading paper in the Auto Sheet 
Feeder is easy and convenient.

Loading paper in the Front Sheet Feeder is suited for printing on paper of regular use. It 
is convenient when printing on the same type or a large amount of paper.

By combining the use of the Auto Sheet Feeder and the Front Sheet Feeder, the 
following ways of paper feeding are available.

• Changing the paper source to feed different types/sizes of paper

Changing the paper source according to the document size allows you to print 
without removing and reloading paper. To change the paper source, use the Paper 
Feed Switch on the printer or printer driver. You can also specify the type/size of 
paper to be fed from the Front Sheet Feeder with the printer driver. For example, you 

QSG_Basic.fm  Page 3  Wednesday, May 19, 2004  5:30 PM