Infocus IN2100 Benutzerhandbuch

5-10 sec.

source

Turn on projector and source

1

   Connect the power cord to the 

projector and to an electrical 

outlet

The power light   on the projector will light amber.

2

  Slide open the lens cover

3

   Turn on the projector

Touch the power light (or press power on the remote).

The power light will start blinking green.

4

   Wait for the lamp to warm up

After a few seconds, the power light will stop blinking 

and turn green. It can take a minute for the lamp to 

reach full brightness.

!

    Warning: Do not look directly into the lens while 

the projector is being used.

5

   Turn on computer or other source

You may need to press a specific key combination to activate 

your laptop’s external video port. On most laptops, hold 

down the FN key while pressing a key labeled CRT/LCD, LCD/
VGA, a monitor icon 

, or similar. Key combos for popular 

models:

Apple F7 

HP/Compaq Fn+F4 or Fn+F6 

Sony Fn+F7

Dell Fn+F8 

IBM ThinkPad Fn+F7 

Toshiba Fn+F5

Fujitsu Fn+F10

Complete laptop activation chart at www.infocus.com/support

    Important: If there is still no video, restart your 

computer (first make sure it’s connected to the 

projector and the projector is turned on).

6

   Change source if needed

If needed, press source (on the projector or remote) 

to view the source. You may have to press it more than 

once.