Crestron electronic CP-WX8240 Benutzerhandbuch

26

The Alert Items are shown below.

Configures the time to alert.

(Only 

Lamp Time Alarm and Filter Time Alarm.)

Click the 

[Enable] check box to enable SNMP Trap alerts.

Click the 

[Enable] check box to enable e-mail alerts.

(Except 

Cold Start and Authentication Failure.)

Configures the subject line of the e-mail to be sent. 

The length of the subject line can be up to 100 alphanumeric 

characters.

(Except 

Cold Start and Authentication Failure.)

Configures the text of the e-mail to be sent. 

The length of the text can be up to 1024 alphanumeric 

characters, but if you are using some of special characters 

below the length may be shorter.

     Special characters  " ' : & , % \  and space

(Except 

Cold Start and Authentication Failure.)

Click the 

[Apply] button to save the settings.

• The trigger of 

Filter Error e-mail is depending on the FILTER 

MESSAGE setting in the SERVICE item of the OPTION menu which defines 

the period until the filter message is displayed on the projector screen. An 

e-mail will be sent when the usage time of the filter exceeds the time limit that is 

set. No notification e-mail will be sent if the FILTER MESSAGE is set to TURN 

OFF. (&

OPTION menu in the Operating Guide)

• 

Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) 

of the lamp time. When the lamp hour exceeds the limit that is configured in the 

Projector Web Control, an e-mail will be sent.

• 

Filter Time Alarm is defined as a threshold for e-mail notification (reminder) 

of the filter time. When the filter hour exceeds the limit that is configured in the 

Projector Web Control, an e-mail will be sent.

• 

Filter Status Notification can be enabled for both or either one of Status 

1 and 2. These notifications are equivalent to the changing of the FILTER 

indicator on the projector. (

Status 1: off to orange, Status 2: orange to red) 

Refer to the 

Operating Guide for details of the FILTER indicator.