Infocus IN5534 Benutzerhandbuch
28
Basic Picture menu
To adjust the following settings, highlight the setting, press Select, use the
arrow buttons to adjust the values, then press Select to confirm the changes.
Brightness
Brightness
: Changes the intensity of the image.
Contrast
: Controls the degree of difference between the lightest and darkest
parts of the picture and changes the amount of black and white in the
image.
Sharpness
Sharpness
: Changes the clarity of the edges of a video image. Select a
sharpness setting.
Color
Color
: Adjusts a video image from black and white to fully saturated color.
The color setting applies to video sources only.
Tint
Tint
: Adjusts the red-green color balance in the image of NTSC video
images. The tint setting applies to NTSC video sources only.
SplitScreen:
SplitScreen:
Allows two distinct sources to be displayed simultaneously.
Switch primary sources, make picture adjustments and choose one of
multiple display options: either two side by side horizontal or vertical
source regions, or a small secondary source image displayed on top of the
primary source in one of four placement options. See page 53 for display
options.
Auto Image:
Auto Image:
Forces the projector to reacquire and lock to the input signal.
This is useful when signal quality is marginal.
Aspect Ratio
Aspect Ratio
: Aspect ratio is the ratio of the image width to image height. TV
screens are usually 4:3. HDTV and most DVDs are 16:9.
Select Auto to have the projector choose the ratio. Choose Native to see the
Select Auto to have the projector choose the ratio. Choose Native to see the
unmodified input with no resizing by the projector. Select 16:9 to watch
: Presets are provided that optimize the projector for
displaying computer presentations and video images under certain
conditions.
There is also a user-definable preset. To set this preset, adjust the image and
There is also a user-definable preset. To set this preset, adjust the image and
select Save User in the Presets menu. You can recall these settings in the
future by selecting the User preset.
Horz Keystone/Vert Keystone
: Adjusts the image horizontally or vertically
and makes a squarer image.
Focus and Zoom
Focus and Zoom
: Adjusts the focus and zooms the image in or out.
Digital Zoom:
Changes the size of projector’s display area. If the display area
has been resized by this setting, it can be moved by changing the Horz Shift
and Vert Shift settings.
Lens Shift...:
Lens Shift...:
Shifts the lens to the up and down or left and right. To center the
lens for transport or other purposes, activate the ‘Auto Center’ feature. This
process will take a minute or two to complete.
Digital Horz Shift/Vert Shift:
Digital Horz Shift/Vert Shift:
Moves the display area horizontally or vertically
if its size has been changed by the Digital Zoom setting.
Basic Picture menu
Aspect ratio
Increasing keystone
Decreasing keystone