Epson 10+ Benutzerhandbuch

Follow the instructions in this section to choose a location for the projector, adjust the image 
and volume, turn off picture and sound, freeze the action, or use the projector menus.

The distance from the projector to the screen or wall determines the size of the picture. The 
picture will be larger when you place the projector further from the screen. See the Quick 
Setup sheet for details about the relationship between distance and picture size.

You can also choose from five different viewing setups. If you install the projector in a rear or 
overhead position, you’ll need to choose the correct Projection option (identified below) from 
the projector’s Setting menu. 

■

Table: For temporary front projection, place the projector on a 
low table in front of the screen. If possible, place the projector 
directly in front of the screen, facing the screen squarely. The 
base of the lens should be about level with the bottom of the 
screen.

■

Shelf: You can also place the projector on a high shelf behind 
you. Attach the three rubber feet that came with the projector 
to the top of the projector, then place the projector 
upside-down. After you turn on the projector, choose 

Front/Ceiling

 for the Projection option in the Setting menu.

■

Ceiling: You can purchase special equipment from Epson to 
attach the projector to your ceiling (see page 12 for ordering 
information). If you choose this setup, professional installation 
is recommended. Choose 

Front/Ceiling 

for the Projection 

option.

Shelf

Table

Ceiling