Epson 10+ Benutzerhandbuch

4. Use the arrow buttons on the remote control or the 

, 

,   or 

 buttons on the 

projector to set these options:

■ Position

See “Repositioning the Picture” on page 22.

■ Zoom Caption

Adjusts both the length of the picture and its vertical position on the screen. You can 
adjust this function only when you’ve selected the 

Zoom

 aspect ratio.

■ Keystone

Corrects vertical keystone distortion of the image (when your image looks like 

 or 

). This procedure makes the image smaller. 

■ Projection

Selects the projection method, as follows: 

■ Setup Level

 (for component video, S-video, and NTSC video only)

If you are using the projector with non-standard video equipment that has different 
black level settings, use this setting to adjust the level of black in the image. See the 
documentation that came with your video equipment for more information.

5. Select the 

Operation

 option to make changes to these settings:

■ Sleep Mode

When sleep mode is on, the projector turns off the lamp if it has not received any 
input signals for the specified amount of time (5, 10, or 30 minutes). You can also 
turn sleep mode off.

■ Child Lock

When this feature is on, the projector will not come on unless you press and hold the 
P

 

Power

 button on the control panel for three seconds. (The remote control 

operates normally.)

Front

Projector is in front of the screen

Front/Ceiling

Projector is in front of the screen, 
positioned upside-down on a shelf or 
mounted upside-down on the ceiling

Rear

Projector is behind the screen

Rear/Ceiling

Projector is behind the screen, mounted 
upside-down from the ceiling