Epson 10+ Benutzerhandbuch

Before you clean the case, turn off the projector and unplug the power cord.

■

To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

■

To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral 
detergent. Then wipe the case.

Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These 
can damage the case.

You can obtain a replacement CR2025 lithium battery commercially. 

Warning: Keep batteries away from children. If a child swallows the battery, contact your 
doctor immediately.

1. Press the catch in as you pull the battery holder out.

2. Remove the old battery and insert the new one. The plus mark (+) on the battery should 

be face up.

3. Reinsert the battery holder in the remote control. Press in until it clicks into place.

Catch