Benq MS517 Benutzerhandbuch

Operation

38

Please refer to the illustration to the right 
for how the colors relate to each other.
For example, if you select Red and set its 
range at 0, only pure red in the projected 
picture will be selected. Increasing its range 
will include red close to yellow and red close 
to magenta.

5.

Press 

 to highlight Saturation and adjust 

its values to your preference by pressing 

/

. Every adjustment made will reflect to 

the image immediately.
For example, if you select Red and set its 
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce 
less saturated colors; a setting of “0” removes that color from the image entirely. If 
the saturation is too high, that color will be overpowering and unrealistic.

6.

Press  

to 

highlight 

Gain and adjust its values to your preference by pressing 

/

. The contrast level of the primary color you select will be affected. Every 

adjustment made will reflect to the image immediately. 

7.

Repeat steps 3 to 6 for other color adjustments.

8.

Make sure you have made all of the desired adjustments.

9.

Press MENU/EXIT to exit and save the settings.

Resetting current or all picture modes

1.

Go to the PICTURE menu and highlight Reset Picture Settings.

2.

Press MODE/ENTER and press  /

 to select Current or All.

• Current: returns current picture mode to the factory preset settings.
• All: returns all settings, except User 1/User 2 in the PICTURE menu to the 

factory preset settings.