Benq MP727 Benutzerhandbuch
Operation
30
English
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an option
for setting up password security. The password can be set through the On-Screen Display
(OSD) menu. For details of the OSD menu operation, please refer to
for setting up password security. The password can be set through the On-Screen Display
(OSD) menu. For details of the OSD menu operation, please refer to
.
You will be inconvenienced if you activate the power-on lock functionality and subsequently
forget the password. Print out this manual (if necessary) and write the password you used in
this manual, and keep the manual in a safe place for later recall.
forget the password. Print out this manual (if necessary) and write the password you used in
this manual, and keep the manual in a safe place for later recall.
Setting a password
Once a password has been set, the projector cannot be used unless the correct password is
entered every time the projector is started.
Once a password has been set and the Splash Screen Lock is activated, you cannot change
the splash screen that display at projector startup unless the correct password is entered.
entered every time the projector is started.
Once a password has been set and the Splash Screen Lock is activated, you cannot change
the splash screen that display at projector startup unless the correct password is entered.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security
Settings menu. Press MODE/ENTER. The Security Settings page displays.
Settings menu. Press MODE/ENTER. The Security Settings page displays.
2.
Highlight Power on Lock and select On by pressing
/
.
3.
As pictured to the right, the four arrow keys (
,
, , )
respectively
represent 4 digits (1, 2,
3, 4). According to the password you desire to
set, press the arrow keys to enter five digits for
the password.
set, press the arrow keys to enter five digits for
the password.
4.
Confirm the new password by re-entering the
new password.
new password.
Once the password is set, the OSD menu returns
to the Security Settings page.
to the Security Settings page.
5.
To activate the Power on Lock function, press
/
to highlight Power on Lock
and press
/
to select On.
6.
To activate the Splash Screen Lock function, press
/
to highlight Splash
Screen Lock and press
/
to select On.
When the Splash Screen Lock is activated, the My Screen function in the SYSTEM
SETUP: Basic menu will be password protected.
SETUP: Basic menu will be password protected.
The digits being input will display as asterisks on-screen. Write your selected password down
here in this manual in advance or right after the password is entered so that it is available to
you should you ever forget it.
here in this manual in advance or right after the password is entered so that it is available to
you should you ever forget it.
Password: __ __ __ __ __
Keep this manual in a safe place.
7.
To leave the OSD menu, press MENU/EXIT.
INPUT NEW PASSWORD
Back
MENU
Power On Lock and Splash Screen Lock
use the same password
use the same password