Benq MP670 Benutzerhandbuch

Operation

25

1.

Plug the power cord into the projector and 
into a wall socket. Turn on the wall socket 
switch (where fitted). Check that the 
POWER indicator light on the projector 
lights orange after power has been applied.

2.

Press 

POWER on the projector or 

remote control to start the projector and a 
start up tone sounds. The POWER 
indicator light flashes green and stays 
green when the projector is on.

The start up procedure takes about 30 
seconds. In the later stage of start up, a 
startup logo is projected.

(If necessary) Rotate the focus ring to 
adjust the image clearness.

To turn off the ring tone, see 

 for details.

3.

To use the OSD menus, please set them to your familiar 
language first. See 

 for details.

4.

If you are prompted for a password, press the arrow keys 
to enter a five digit password. See 

 for details.

5.

Switch all of the connected equipment on.

6.

The projector will start to search for input signals. The 
current input signal being scanned displays in the upper 
left corner of the screen. If the projector doesn't detect a 
valid signal, the message 'No Signal' will continue 
displaying until an input signal is found.

You can also press SOURCE on the projector or remote 
control to select your desired input signal. See 

 for 

details.