Benq MP670 Benutzerhandbuch

Operation

33

4.

Press 

 to highlight Keystone and press MODE/ENTER. The Keystone correction 

page displays.

5.

Press 

 to correct keystoning at the top of the 

image or press 

 to correct keystoning at the 

bottom of the image.

If you need to find the details on the projected picture, magnify the picture. Use the 
direction arrow keys for navigating the picture.

•

Using the remote control

1.

Press Zoom +/- to display the Zoom bar.

2.

Press Zoom + to magnify the center of the picture. Press the 
key repeatedly until the picture size is suitable for your need.

3.

Use the directional arrows (

, 

, 

, 

) on the projector or 

remote control to navigate the picture.

4.

To restore the picture to its original size, press AUTO. You can 
also press Zoom -. When the key is pressed again, the picture 
is further reduced until it is restored to the original size.

•

Using the OSD menu

1.

Press MENU/EXIT and then press 

/

 until the DISPLAY 

menu is highlighted.

2.

Press

 

 to highlight Digital Zoom and press MODE/ENTER. The Zoom bar 

displays.

3.

Repeat steps 2-4 in the section of 

 above. Or if you are 

using the projector control panel, continue to the following steps.

4.

Press 

 on the projector repeatedly to magnify the picture to a desired size.

5.

To navigate the picture, press MODE/ENTER to switch to the paning mode and 

press the directional arrows (

, 

, 

, 

) to navigate the picture.

6.

To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/out 
functionality, and press AUTO to restore the picture to its original size. You can also 
press 

 repeatedly until it is restored to the original size.