Ricoh PJ X3241 Benutzerhandbuch
38
Detailed description
[Screen size]
Normal
•
: Enlarge an input image to fit the screen without changing the aspect
ratio of video signals.
Full
•
: Displays an input image in 104 × 768 dot resolution by enlarging it to
fill the entire screen. (X3131/X341)
Displays an input image in 180 x 800 dot resolution by enlarging it to
fill the entire screen. (WX3131)
Displays an input image in 180 x 800 dot resolution by enlarging it to
fill the entire screen. (WX3131)
Thru
•
: Displays an input image in the native resolution of the video signals. Thru
display is not available for Y/P
B
/P
R
, Video and S-Video-input images.
The larger image than the screen size will be displayed over the
screen. The input image may appear vertically long with some
frequencies of video signals.
screen. The input image may appear vertically long with some
frequencies of video signals.
Wide
(X3131/
X3241)
(X3131/
X3241)
•
: Displays an input image in the center of the screen with a 16:9 aspect
ratio by enlarging it to fit the width of the screen. The upper and lower
portions of the image will be compressed.
Wide display is not available for Computer-input images.
portions of the image will be compressed.
Wide display is not available for Computer-input images.
4:3 zoom
(WX3131)
(WX3131)
•
: Displays an input image with a 4:3 aspect ratio by enlarging it
vertically. The enlarged image will be displayed over the screen.
4:3 zoom display is not available for computer images.
4:3 zoom display is not available for computer images.
For Y/P
B
/P
R
input, screen size setting function is not available for the video signals
with a 16:9 aspect ratio.
•
Note
If you use the screen size setting function on commercial video software, broadcast
or cable-broadcasting programs to display images with the varying aspect ratio
except for the purpose of your private viewing and listening, it may infringe the
copyright protected by the copyright laws.
or cable-broadcasting programs to display images with the varying aspect ratio
except for the purpose of your private viewing and listening, it may infringe the
copyright protected by the copyright laws.
[Up/down shift]
Shifts the projected image vertically when [
Screen size] is [Wide] for X3131/X341.
Shifts the projected image vertically when [
Screen size] is [4:3 zoom] for WX3131.
[Blackboard mode]
Projects the image in colors more like projecting on a screen.
Precaution
The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected screens.
blackboard and wall even if the selected color is the same as the projected screens.
[Background]
RICOH is set for [
Logo] by factory setting.
If user’s logo has been registered, it is displayed when [
Logo] is set for background.
[Start-up screen]
If user’s logo has been registered and this setting is [
On], the logo is displayed at start-up.
[User logo]
Registers a part of the image that is input from computer, as a stationary picture and
displays it as a logo at start-up and when no signal is input.
displays it as a logo at start-up and when no signal is input.
•
•
•
•
•
Using the menus (Continued)