RAD Data comm 100 Benutzerhandbuch

Seite von 9
 
 
WAN 
• 
Protocol 
HDLC 
• 
Data Rate 
Up to 10 Mbps synchronous  
• 
Throughput 
With WAN rate 10 Mbps: 
 
19700 pps for 64-byte frames and 
increment byte data (00, 01, 02, …) 
 
802 pps for 1536-byte frames and 
increment byte data (00, 01, 02, …) 
• 
4-wire Range 
700m (2300 ft) 
• 
Connectors 
 
V.24/RS-232, DB-25 female 
 
V.35, 34-pin female via adapter cable 
 
V.36/RS-422, DB-37 female via adapter 
cable 
 
RS-530, DB-25 female 
 
X.21, DB-15 female via adapter cable 
 
4-wire: 5-pin terminal block 
• 
Operating Range 
Using Cat. 5 UTP cable: 
 
10 Mbps: 500m (1640 ft) 
 
5 Mbps:  700m (2300 ft) 
 
 
GENERAL 
• 
Physical 
Length:  69 mm  / 2.7 in 
Width:  53 mm  / 2.1 in 
Height:  18 mm  / 0.7 in 
Weight:  30 g 
/ 1.0 oz 
• 
Power Supply 
External 5 VDC/0.6A regulated adapter 
Note: While TinyBridge-100 operates with any 
regulated 5 VDC, 600 mA power supply, the CE 
approval for the 4-wire versions requires provision of a 
grounding path through the use of a power supply with 
a three-prong plug. 
• 
Power Consumption 
400 mA @ 5 VDC 
• 
Environment 
Temperature: 0–50°C (32–122°F) 
Humidity: 
Up to 90%, non-condensing 
 
SAFETY 
 
 
Safety Instructions 
The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance. 
IMPORTANT 
North American Users 
The TinyBridge-100 is powered by an 
external power supply. To reduce the risk of 
electric shock, fire and injury to persons: 
Use only with a UL-listed and CSA Certified 
Class 2 power supply rated 5 VDC, 600 mA 
or more. 
 
Instructions de Sécurité 
Le point d’exclamation dans le triangle 
équilatéral alerte l’utilisateur d’importantes 
instructions concernant le fonctionement et 
l’entretien mentionées dans le livre qui 
accompagne l’appareil. 
IMPORTANT 
Pour les utilisateurs Nord Américains 
Le TinyBridge-100 est renforcé par un 
transformateur extérieur. Afin de réduire le 
risque d’électrocution, de feux ou de 
blessure: 
Utiliser seulement avec le UL listé et le CSA 
Certifié Classe 2 le transformateur de 5 
VDC, 600 mA, ou plus.