HP (Hewlett-Packard) HP-30 Coax Benutzerhandbuch
INTRODUCTION
Dynamix HP-30 Coax, HCNA (HomePNA3.0 over Coax) to Ethernet bridge connects any Ethernet
device to a high speed access device or to a LAN for Internet access. This bridge brings you the
newest Ethernet compatible technology that uses the coaxial cable as the network’s physical wiring
thereby eliminating the need to install new wiring. It is designed to operate on the coaxial TV cable
installed in homes.
Dynamix HP-30 Coax enables You to set-up your Private Network at Home with your Existing
Coaxial Cable. No additional Network wiring is necessary. You may just Find a Coax Connector in
the wall, put the coaxial plug into the connector, you can then be ready to access the broadband
Internet. No extra utility is needed. No setting, just link. Simply Plug & Play.
Via the RJ-45 Ethernet Ports, You can connect Dynamix HP-30Coax with the Ethernet -Interfaced
Devices such as STB, Camera Server, PC, or Switch/Hub. The High speed of 128Mbps will bring
you to enjoy the “video-on-demand” or “multimedia-on-demand” services.
This bridge allows you to connect PCs and Ethernet enabled devices, such as Switch, HUB and
printers, to a Home Networking LAN by simply plugging into the existing coaxial F-Type
connector.
Coaxial Cable. No additional Network wiring is necessary. You may just Find a Coax Connector in
the wall, put the coaxial plug into the connector, you can then be ready to access the broadband
Internet. No extra utility is needed. No setting, just link. Simply Plug & Play.
Via the RJ-45 Ethernet Ports, You can connect Dynamix HP-30Coax with the Ethernet -Interfaced
Devices such as STB, Camera Server, PC, or Switch/Hub. The High speed of 128Mbps will bring
you to enjoy the “video-on-demand” or “multimedia-on-demand” services.
This bridge allows you to connect PCs and Ethernet enabled devices, such as Switch, HUB and
printers, to a Home Networking LAN by simply plugging into the existing coaxial F-Type
connector.
With Dynamix HP-30Coax you can even quickly extend or flexibly change the existing LAN
environment. No Re-wiring more.
Features
• Plug & Play
• Using existing coaxial TV cable to build a home
network
• Shares high speed Internet access and streaming
video
• 1 port 128Mbps connection compliant with
HomePNA 3.0 over Coax (HCNA) standard
• 2 Standard 10/100BaseT Fast Ethernet ports for
connecting to Ethernet or cable modem
• 10/100Mbps Auto Negotiation Support
network
• Shares high speed Internet access and streaming
video
• 1 port 128Mbps connection compliant with
HomePNA 3.0 over Coax (HCNA) standard
• 2 Standard 10/100BaseT Fast Ethernet ports for
connecting to Ethernet or cable modem
• 10/100Mbps Auto Negotiation Support
• MDI/MDIX Auto Crossover Support
• QoS Priority Mapping Support