Intel 21555 Benutzerhandbuch
21555 PCI-to-PCI Bridge Evaluation Board User’s Guide
9
Introduction
1.5
Stake-Pin Jumper
shows the configuration and the function of the single stake-pin jumper. J8 enables the
DE1B55503 hot-swap functionality, controls operation of LED L1, and connects the l_stat signal
to a pullup resistor.
to a pullup resistor.
Table 1. DIP Switch Operation
Switch
Pack
Pack
Switch
The Switch Controls
Reference Information
J9
SW1, 2, 3
PICMG configurations. (See
).
SW4 PR_AD1
strapping
option.
21555 Non Transparent
PCI-to-PCI Bridge User’s
Manual
PCI-to-PCI Bridge User’s
Manual
SW5
PR_CS to either Flash or optional ROM socket.
J20
SW1
PR_AD2 for SROM operation.
SW2
PR-AD3 for lockout bit control.
SW3
PR_AD4 for synchronous or asynchronous clocking.
SW4
PR_AD5 for S_CLKO operation.
SW5
PR_AD6 for Central function selection.
J21
SW#
(1,2,3,4,5)
(1,2,3,4,5)
The REQ/GNT lines for Arbiter control.
Table 2. Stake-Pin Jumper
a
Jumper
Function
J8
•
When removed, the hot-swap functionality is enabled, and L1 will light.
•
When installed, hot-swap functionality is disabled and the L1 LED is
extinguished.
extinguished.
a.
No jumper is installed by the Factory default.