Gateway 2701 Benutzerhandbuch
20
Appendix A: Install the Gateway on Other
Operating Systems
Operating Systems
Follow these instructions if you are using an operating system that is not supported by the 2Wire CD (such
as any Macintosh OS prior to 10.2, UNIX, or Linux).
as any Macintosh OS prior to 10.2, UNIX, or Linux).
There are many ways to set up your network, but typically the first computer is located in the same room as
the gateway and your DSL connection. Ethernet is the preferred connection method for your first computer,
although instructions for connecting via USB are also provided.
the gateway and your DSL connection. Ethernet is the preferred connection method for your first computer,
although instructions for connecting via USB are also provided.
Ethernet Connection
Figure 7. Gateway Connected Via Ethernet (Macintosh)
1.
Install DSL phone filters according to the instructions on page 2.
2.
Connect the provided power adapter from the gateway’s
POWER
port to an electrical outlet.
3.
Connect the provided gray phone cable from the gateway’s
PHONE LINE
port to the DSL filter jack
labeled DSL/HPNA.
4.
Connect the yellow Ethernet cable provided with the gateway from a
LOCAL
ETHERNET
port on the
gateway to your computer’s Ethernet port.
5.