D-Link DSL-2540B Benutzerhandbuch
11
D-Link DSL-540B ADSL+ 4-Port Router User Manual
Section 4 - Configuring Your Computer
7. If prompted to restart your computer with the new settings, click OK.
8. After your computer restarts, click on the Network and Dial-up Connections icon again, and right click on
the Local Area Connection icon and then select Properties.
9. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) and then click on
Properties.
10. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use the following
IP address and type 19.168.1.x (where “x” is any number between and 54) and 55.55.55.0 in the
IP address field and Subnet Mask field.
IP address field and Subnet Mask field.
11. Click on OK twice to save your changes and then close the Control Panel.
Windows
®
XP
1. In the Windows taskbar, click on the
Start button then go to Control Panel and then click Network
Connections.
. In the
Network Connections window, right click on the Local Area Connection icon and click on
Properties.
3. Listed in the
Local Area Connection window are the installed network components. Make sure the box
for Internet Protocol (TCP/IP) is checked and then click on
Properties.
4. In the Internet Protocol (TCP/IP) Properties dialog box, click on the radio button labeled
Use the following
IP address and type 19.168.1.x (where x is any number between and 54) for the IP address field
and 55.55.55.0 for the Subnet Mask field.
and 55.55.55.0 for the Subnet Mask field.
5. Click on
OK twice to save your changes and then close the Control Panel.