Huawei MC509 Benutzerhandbuch
HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification
AT Command Interface Specification
Internet Service Interface Commands
Issue 01 (2011-08-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
^IPCLOSE:1,1,0,0,0
OK
AT^IPCLOSE=1
OK
AT^IPCLOSE?
^IPCLOSE:0,1,0,0,0
OK
10.8 ^IPENTRANS–Command for Enabling the
Transparent Transmission Mode
Transparent Transmission Mode
10.8.1 Syntax
Command
Possible Response(s)
^IPENTRANS=<link_id>
<CR><LF>OK<CR><LF>
In case of an MT-related error:
<CR><LF>ERROR<CR><LF>
10.8.2 Interface Description
This command enables the TCP transparent transmission mode. In this mode, there
is no length restriction on the subscriber data being transmitted to the remote end
through a TCP connection.
is no length restriction on the subscriber data being transmitted to the remote end
through a TCP connection.
After "OK" is returned, a subscriber can continuously enter data and transmit the data
to the remote end.
to the remote end.
If a subscriber continuously enters +++, the transparent transmission mode is
disabled.
disabled.
A UDP connection does not support this mode.
10.8.3 Parameter Description
<link_id>: Specifies the ID of an established connection. The value ranges from 1 to 5.