Huawei MC509 Benutzerhandbuch

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification

GPS Commands

Issue 01 (2011-08-26)

Huawei Proprietary and Confidential

134

GPS Commands

14.1 ^WPDOM–Command for Setting Operation Mode

14.1.1 Syntax

Command

Possible Response(s)

^WPDOM=<mode>

Error:

<CR><LF>+CME ERROR: <err><CR><LF>

^WPDOM?

<CR><LF>^WPDOM: <mode><CR><LF>

^WPDOM=?

<CR><LF>^WPDOM: (list of supported <mode>s)
<CR><LF>

14.1.2 Interface Description

This command is used to set the position operation mode. Read command can
queries current operation mode, Test command returns supported operation mode.
SET command can only be used before position session beginning or after

end, can‟t

be used during positioning, or will be error.

14.1.3 Parameter Description

<mode>: operation mode, default value is 0, no storing at power down

 0: standalone only mode，no network assistance is required, and the MS can be

in or out of network coverage.

 1: network only mode，MS operates in MS-assisted position calculation mode

only, MS communications with AGPS server for every position fix, and every fix
is calculated by AGPS server. Both PDE/PDM access and network coverage are
required for this mode of operation. If this mode failed, it

‟ll switch to Cell-ID mode.