Netcomm N300 Benutzerhandbuch

3G18Wn User Guide

ymL18WN

18WN

www.netcomm.com.au

Advanced

this page allows you to modify the advanced wireless settings for your 3G router. these settings should not be changed unless you are
aware of what effect they will have.

Name

Description

Beacon Interval:

Interval of time the wireless router broadcasts a beacon, used to synchronize the wireless network.

Data Beacon Rate (DTIM):

Enter a value between 1 and 255 for the Delivery Traffic Indication Message (DTIM). A DTIM is a

countdown informing clients of the next window for listening to broadcast and multicast messages

Fragment Threshold:

This specifies the maximum size of a packet during the fragmentation of data to be transmitted. If you

set this value too low, it will result in bad performance.

RTS Threshold:

When the packet size is smaller than the RTS threshold, the wireless router will not use the RTS/CTS

mechanism to send this packet.

AP Isolation:

This feature allows you to isolate clients on your wireless network. To enable communication between

the wireless clients connected to your 3G router, select Disabled. to cut the communication between

the wireless clients, please choose enabled.

TX Power:

this determines the output power of the antenna

WMM Capable:

WMM (Wi-Fi Multimedia) if enabled supports QoS (Quality of Service) for experiencing better audio, video

and voice in applications

WMM Parameters:

Click on the WMM Configuration button to configure the WMM parameters

Broadcast Network Name (SSID):

Select ‘Disabled’ to hide the SSID of your 3G Router. If disabled, other people will not be able scan and

detect this product’s SSID.

Click Apply to save the settings.