Citrix Systems CITRIX NETSCALER 9.3 Benutzerhandbuch

1. In the navigation pane, expand System, and then click Groups.

2. In the details pane, select the group to which you want to bind a command policy,

and then click Open.

3. In the Configure System Group dialog box, under Command Policies, all the

command policies configured on your NetScaler appear on the list. Select the
check box next to the name of the policy you want to bind to this group.

4. In the Priority column to the left, modify the default priority as needed to ensure

that the policy is evaluated in the proper order.

5. Click OK.

A message appears in the status bar, stating that the group has been configured
successfully.

The nsroot account provides complete access to all features of the Citrix

®

 NetScaler

®

appliance. Therefore, to preserve security, the nsroot account should be used only
when necessary, and only individuals whose duties require full access should know the
password for the nsroot account. Frequently changing the nsroot password is advisable.
If you lose the password, you can reset it to the default and then change it.

To reset the nsroot password, you must boot the NetScaler into single user mode,
mount the file systems in read/write mode, and remove the set NetScaler user nsroot
entry from the ns.conf file. You can then reboot, log on with the default password, and
choose a new password.

1. Connect a computer to the NetScaler serial port and log on.

Note:  You cannot log on by using ssh to perform this procedure; you must
connect directly to the NetScaler appliance.
As the operating system starts, it displays the following message:

Hit [Enter] to boot immediately, or any other key for
command prompt.

Booting [kernel] in # seconds.

2. Press CTRL+C.

The following message appears:

Chapter 1

 Authentication and Authorization

34