Citrix Systems CITRIX NETSCALER 9.3 Benutzerhandbuch

Note:  The NetScaler appliance does not support host names for SNMP
managers that have IPv6 addresses.

Subnet of management stations. Used to grant access from entire subnets to the
NetScaler appliance.

The duration, in seconds, for which the NetScaler appliance waits to send the next
DNS query to resolve the host name of the SNMP manager if the last query failed. If
last query succeeds, the NetScaler waits for the TTL time. Minimum value: 5.
Maximum value: 20940. Default value: 5.

1. In the navigation pane, expand System, expand SNMP, and then click Managers.

2. In the details pane, click Add.

3. In the Create SNMP Manager dialog box, specify values for the following

parameters, which correspond to parameters described in "Parameters for
configuring an SNMP manager" as shown:

• IP Address*—IPAddress

• Netmask—netmask

*A required parameter

4. In the Create SNMP Manager dialog box, do one of the following:

• To specify the host name of an SNMP manager, select Management Host and set

the following parameters:

w

Host Name*—IPAddress

w

Resolve Retry (secs)*—domainResolveRetry

Important:  If you specify the SNMP manager’s host name instead of its IPv4
address, you must configure a DNS name server to resolve the host name to
the SNMP manager’s IP address. For more information, see the instructions
for adding a name server in the Citrix NetScaler Traffic Management Guide.
For a link to the guide, see the 

.

• To specify the IPv4 address of an SNMP manager, select Management Network

and set the following parameters:

w

IP Address*—IPAddress

w

Netmask—netmask

5. Click Create, and then click Close.

A message appears in the status bar, stating that the SNMP manager has been
configured successfully.

Citrix NetScaler Administration Guide

57