Citrix Systems CITRIX NETSCALER 9.3 Benutzerhandbuch

audserver -stopservice

You can customize logging on the NSLOG server by making additional modifications to
the NSLOG server configuration file (log.conf). Use a text editor to modify the
log.conf configuration file on the server system.

To customize logging, use the configuration file to define filters and log properties.

w

Log filters. Filter log information from a NetScaler appliance or a set of NetScaler
appliances.

w

Log properties. Each filter has an associated set of log properties. Log properties
define how to store the filtered log information.

You can use the default filter definition located in the configuration file (audit
log.conf ), or you can modify the filter or create a new filter. You can create more
than one log filter.

Note:  For consolidated logging, if a log transaction occurs for which there is no filter
definition, the default filter is used (if it is enabled.) The only way you can configure
consolidated logging of all the Citrix NetScaler appliances is by defining the default filter.

At the command prompt, type the following command in the configuration file
( auditlog.conf) :

filter <filterName> [IP <ip>] [NETMASK <mask>] [ON | OFF]

<filterName>: Specify the name of the filter (maximum of 64 alphanumeric characters).

<ip>: Specify the IP addresses.

<mask>: Specify the subnet mask to be used on a subnet.

Specify ON to enable the filter to log transactions, or specify OFF to disable the filter.
If no argument is specified, the filter is ON

Examples

filter F1 IP 192.168.100.151 ON

To apply the filter F2 to IP addresses 192.250.100.1 to
192.250.100.254:

filter F2 IP 192.250.100.0 NETMASK 255.255.255.0 ON

Citrix NetScaler Administration Guide

89