Lantronix 1-T2 Benutzerhandbuch
Basic Configuration
Serial Port Configuration
4 - 7
A dedicated service is conÞgured the same way as a preferred
service. No dedicated service is conÞgured for the MSS by default.
service. No dedicated service is conÞgured for the MSS by default.
Ex:
CHANGE DEDICATED LAT:LN=vax8:LD=0005
NOTE:
Because dedicated connections leave no easy way to log into the
server, configuring the MSS serial port for dedicated service is
not recommended unless incoming logins are enabled.
Otherwise, only Telnet console port connections are possible.
server, configuring the MSS serial port for dedicated service is
not recommended unless incoming logins are enabled.
Otherwise, only Telnet console port connections are possible.
¥
Autostart
: Normally, the serial port will wait for a carriage return
before starting a connection. When the Autostart option is enabled,
the connection will be established as soon as the unit boots. If
modem control is enabled, the connection will be established as
soon as the DSR signal is asserted.
the connection will be established as soon as the unit boots. If
modem control is enabled, the connection will be established as
soon as the DSR signal is asserted.
A port set for Autostart will not be idle, and therefore will not be
available for network connections. If network connections are
desired, Autostart should remain disabled (the default).
available for network connections. If network connections are
desired, Autostart should remain disabled (the default).
Ex:
CHANGE AUTOSTART ENABLED