Toshiba NB200 Benutzerhandbuch

User’s Manual

3-9

Getting Started

■

Saves data to the hard disk drive when the computer automatically 

shuts down because of a low battery condition.

■

You can return to your previous working environment immediately when 

you turn on the computer.

■

Saves power by shutting down the system when the computer receives 

no input or hardware access for the time period set by the System 

Hibernate feature.

■

Allows the use of the panel power off feature.

To enter Hibernation Mode, follow the steps below.
1. Click Start.
2. Select Turn Off Computer.
3. Open the Turn Off Computer dialog box.
4. Select Hibernate.

The computer can be configured to enter Hibernation Mode automatically. 

In order to define these settings, you can follow the steps as described 

below:
1. Open Power Options in Control Panel. (Click Start, click Control 

Panel, click Performance and Maintenance, and then click Power 

Options.)

2. Click the Hibernate tab, select the Enable hibernate support check 

box, and then click Apply.

3. Click the Power Schemes tab, and then select a time period in System 

hibernates. Your computer hibernates after it has been idle for the 

specified amount of time.

When you turn off the power in Hibernation Mode, the computer will take a 

moment to save the current data in memory to the hard disk drive. During 

this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved 

to the hard disk drive, turn off the power to any peripheral devices.

In Standby mode the power remains on, but the CPU and all other devices 

are in standby mode.

You can also enable Hibernation Mode by pressing FN + F4 - please refer