Fortinet 110C Benutzerhandbuch

Seite von 56
FortiGate-110C FortiOS 3.0 MR6 Install Guide
40
01-30006-0481-20080728
Using the CLI
FortiGate Firmware
To configure the USB Auto-Install
1
Go to System > Maintenance > Backup and Restore. 
2
Select the blue arrow to expand the Advanced options. 
3
Select the following:
• On system restart, automatically update FortiGate configuration file if default 
file name is available on the USB disk.
• On system restart, automatically update FortiGate firmware image if default 
image is available on the USB disk. 
4
Enter the configuration and image file names or use the default configuration 
filename (system.conf) and default image name (image.out). 
5
The default configuration filename should show in the Default configuration file 
name field.
6
Select Apply. 
Using the CLI
Installing firmware replaces your current antivirus and attack definitions, along 
with the definitions included with the firmware release you are installing. After you 
install new firmware, make sure that antivirus and attack definitions are up to date. 
You can also use the CLI command execute update-now to update the 
antivirus and attack definitions. For details, see the FortiGate Administration 
Guide
.
Before you begin, ensure you have a TFTP server running and accessible to the 
FortiGate unit.
To upgrade the firmware using the CLI
1
Make sure the TFTP server is running. 
2
Copy the new firmware image file to the root directory of the TFTP server. 
3
Log into the CLI. 
4
Make sure the FortiGate unit can connect to the TFTP server. 
You can use the following command to ping the computer running the TFTP 
server. For example, if the IP address of the TFTP server is 192.168.1.168:
execute ping 192.168.1.168
Note: You need an unencrypted configuration file for this feature. Also the default files, 
image.out and system.conf, must be in the root directory of the USB key. 
Note: Make sure at least FortiOS v3.0MR1 is installed on the FortiGate unit before 
installing.