Farallon Communications 612 Benutzerhandbuch
Modem Operation
A-11
S registers
The Netopia ISDN Modem suppor ts the S registers listed in the
following table. All S registers except S register 0 are the Netopia
ISDN Modem’s extended registers.
following table. All S registers except S register 0 are the Netopia
ISDN Modem’s extended registers.
An asterisk next to an S register indicates the S register value is
stored in non-volatile memor y and is not cleared or returned to the
default value if the Netopia ISDN Modem is powered down.
stored in non-volatile memor y and is not cleared or returned to the
default value if the Netopia ISDN Modem is powered down.
To define an S register value, use the following format: ATS?=XX, ?
represents the S register and XX is the desired S register setting.
represents the S register and XX is the desired S register setting.
\T
Link inactivity timer
\T0
\T0
disables inactivity timer (default).
\Tn
link inactivity timer in minutes. The ISDN
modem automatically disconnects the call if
no activity is sensed within
modem automatically disconnects the call if
no activity is sensed within
n (n = 1–255)
minutes.
V
Result code format
V0
V0
enables shor t form result codes.
V1
enables long form result codes (default).
&W
Stores the configuration of all S registers that are
not par t of the ISDN modem’s initial configuration
set.
not par t of the ISDN modem’s initial configuration
set.
Z
Reset. Disconnects all calls in progress and
per forms a complete ISDN modem system reset.
per forms a complete ISDN modem system reset.
+++
Causes ISDN modem to enter the command state
if it is currently in the online state.
if it is currently in the online state.
%V
Displays Netopia ISDN Modem firmware version.
Command
Description