Extreme networks AG200 Benutzerhandbuch

Sentriant AG200 Hardware Installation Guide

Only trained service personnel should perform service to Extreme Networks equipment and their 
components. Trained service personnel have read all related installation manuals, have the technical 
training and experience necessary to be aware of the hazards to which they are exposed in performing a 
task, and are aware of measures to minimize the danger to themselves or other persons.

Consider the following items before installing equipment.

●

The system is designed to operate in a typical environmentally controlled Telco environment. Choose 
an indoor area that has the following characteristics:

■

Temperature- and humidity-controlled, such that the maximum ambient room temperature shall 
not exceed 95ºF (35ºC) 

■

Clean and free from airborne materials that can conduct electricity (other than normal room dust)

■

Well ventilated and away from sources of heat including direct sunlight

■

Away from sources of vibration or physical shock

■

Isolated from strong electromagnetic fields produced by electrical devices

■

Secured, enclosed, and restricted-access, ensuring that only trained and qualified service 
personnel have access to the equipment

●

Establish at least 3 inches clearance on all sides for effective ventilation. Do not obstruct the air 
intake vent on the front, side, or rear ventilation grills. Locate the system away from heat sources. 

When you connect the system to power:

●

Plug power supplies only into properly grounded electrical outlets to help prevent electrical shock 
and comply with international safety standards.

●

Make sure the voltage and frequency of your power outlet match the system electrical ratings for the 
equipment. The building and/or power source must provide overload protection. 

●

Use only power cords that are certified for use within the country of use. Do not attempt to modify 
AC power cords.

●

Use a surge suppressor, line conditioner, or uninterruptible power supply to protect the system from 
momentary increases or decreases in electrical power.