Star Micronics IFBD-HW03/04 Benutzerhandbuch

 

IFBD-HW03/04 Product Specifications Rev. 0.00 

 

3.4.2.2.  TRAP Occurrence Phenomenon   

When the EnableAuthenTrap setting on this product is set to ENABLE (which can be set from the 

Web or Telnet), the following three types of phenomenon occur for the product to issue a TRAP to the 

SNMP manager (Trap notification address).     

 

TRAP Occurrence Phenomenon   

1. When the product is started   

[Generic trap type = 0 (Cold Start)] 

2. When the printer status has changed (IEEE1284 port status monitoring) 

[Generic trap type = 6 (Enterprise Specific)] 

3. When there was access using an illegally authenticated community name   

[Generic trap type = 4 (Authentication Failure)]   

 

3-31