Star Micronics IFBD-HW03/04 Benutzerhandbuch

IFBD-HW03/04 Product Specifications Rev. 0.00

      :DISABLE
<< Configure SNMP >>
  [Authentic Community]
      :"******"
        [Trap Community]
                :"public"
        [Trap Address(IP)]
                :0.0.0.0
        [SysContact]
                :""
        [SysName]
                :""
        [SysLocation]
                :""
  [EnableAuthenTrap]
                :2
<< Configure Secure Print >>
        [Secure Print]
                :ENABLE
  [SSL Mode]
                :ALL

“*** Diagnostic report ***”

The following shows the self-diagnosis print.

When an error is detected at startup, ”*** Hardware problem report ***” is printed.

First Digit

Second Digit

Third Digit

Fourth Digit

Sum value described in
ROM

Sum value actually calculated

Always 0

NIC check: Shows the results of an NIC packet transmission test. Also, prints the

MAC address.

First Digit

Second Digit

Third Digit

Fourth Digit

Sum value described in
EEPROM

Sum value actually calculated

Always 0

*** Configuration report ***

The following information indicates the environment setting information stored in the

product.

In environment setting printing, when the protocol stack is disabled, information relating

to the disabled protocol is not output.

(The printing example above is the output result using default settings.)

3-34