Fellowes 225Mi Benutzerhandbuch

Paper detection sensors are designed for maintenance free operation. However, on rare occasions, the sensors may become blocked by paper dust causing the motor to run 
even if there is no paper present. 

(Note: two paper detection sensors are located in the center of the paper entry)

.

Turn off and unplug

shredder

Locate Auto-start  

infrared sensor

Using cotton swab, wipe

away any contamination 

from the paper sensors

Dip cotton swab in 

rubbing alcohol

Model 225Mi

All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive
noise when shredding and could ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you
empty your waste bin.

15

15

*Apply oil across entry

Press and hold forward 
(    ) 2-3 seconds

225Mi

2 25M i

225Mi

Bin Full Indicator: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36054.

Door Open Indicator: The shredder will not run if the cabinet door is open. When illuminated, close the door to resume shredding.

Remove Paper Indicator: When illuminated, press reverse (

) and remove paper. Reduce paper quantity to an acceptable amount and reefed into paper entry.

SafeSense

®

 Indicator:  If hands are too close to the paper entry, the SafeSense

®

 indicator will illuminate and the shredder will stop shredding.  If SafeSense

®

 

is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds.