Antex electronic SX-34 Benutzerhandbuch

52

Unless otherwise noted, THD+N and Dynamic Range measure-
ments are done at 1KHz, A weighting, 48 KHz sample rate.
Maximum input and output levels are for digital full scale.

Sample rates ............................ 8, 11.025, 16, 22.05, 44.1, 48 KHz

Frequency Response ...............................20Hz to 20KHz, +/- .5dB

Mic input level...............................................................10mV RMS

Mic input impedance......................................................... 1K ohms

Mic phantom power ......................... 2.5VDC w/ 2K limiting resistor

THD+N ........................................................................... .02% max

Dynamic Range ................................................................ 80 B min

Balanced Output level, low trim ............................................+8dBu

Balanced Output level, high trim .........................................+20dBu

Balanced Output impedance (each leg)............................ 50 ohms

Balanced Output load impedance.............................600 ohms min

Line In/ Aux In level, low trim ................................................+8dBu

Line In/ Aux In level, high trim.............................................+20dBu

Line In/ Aux In input impedance............................... 25K ohms min

DSP............................................................... TMS320C32, 60MHz